A 10-Point Plan for (Without Being Overwhelmed)

Standard Colors for Your Underground Utilities

Underground utilities can easily be identified today. Before, it was difficult to do so and people were at risk if they try to make a dig without being able to identify all the lines underneath the land. Although not completely eliminated, risks today have been reduced. In order to prevent harm, it is important to know or identify these utility lines if your need to dig the ground. The OSHA requires that utilities underground first be located before digging through a piece of land. You dont want something disastrous to occur. Fatal injuries can happen if underground utility lines are struck. Services in the area where the lines are located can experience interruption. Before digging their property, people should call 811 to call the utility companies so that these incidents are prevented. Calling the 811 number will enable utility companies to come out and mark their respective utility lines.

Marking lines may lessen the risks but there are time when accidents still happen. The reality is that there is an incident almost every 6 minutes where utility line are struck. Traffic lights, wastewater pipes, telecommunication lines, etc. are affected when lines are struck. Public heath and safety is affected when this happens.

GPR or Ground Penetrating Radar is used by companies to locate their utility lines. This has made it easier to locate utility lies underground and other important things. Companies can locate their utility lines if any property owner calls 811.

There are certain colors that mark different utility lines for easy identification. Below are some of the colors used for different utility lines.

Proposed excavation sites use white lines. It locates areas that will be excavated in the near future.

If you see pink lines, they are temporary survey markings. These are used by surveyors to mark off legal property boundaries.

If you see red lines, then you can be sure that these are electric power lines, cable, conduit, and lighting cables. The color red is associated with fire and danger so it is just appropriate to use it for electrical works.

Yellow lines are used for gas, oil, steam, petroleum, and gaseous materials. The bright color yellow is used to be a warning sign since a natural gas leak can create a potentially disastrous situation.

Communication, alarm, signal lines, cable, or conduit use orange lines. Blue lines are used for potable water. If you see purple lines, that this is for reclaimed water, irrigation and slurry lines. Sewer and drain lines use the color green. A project can be derailed for a long time when these utility lines are hit.

You can learn more about the color coding of utility lines if you click here now! Click here for more.

Author: adminx